Part Number 8099502
EHMD-40-RE-GE-16
Module tay kẹp xoay Festo EHMD-40-RE-GE-16 (Mã 8099502)
Rotary gripper module · Phụ kiện
Gọi kỹ thuật 0964.032.890 Tải datasheet PDF
Liên hệ báo giá: dongluc.industry@gmail.com
Thông số kỹ thuật
| Size | 40 |
|---|---|
| Rotation angle | Innite |
| Stroke per gripper jaws | 15 mm |
| Controllable stroke range per gripper jaw | 0 mm...15 mm |
| Reversing backlash theoretical | 0.8 mm |
| Stepper angle for complete step | 1.8 deg |
| Step angle full step, rotation | 1.8 deg |
| Stepping angle tolerance | ±5% |
| Step angle tolerance, rotation | ±5% |
| Number of gripper jaws | 2 |
| Mounting position | Any |
| Design | Electric rotary drive Electric gripper |
| Mode of operation | Electric parallel gripper |
| Operating mode, rotation | Hybrid stepper motor |
| Gear unit ratio | 1:1 |
| Position detection | Turning: Motor encoder Gripping: Motor encoder |
| Gripper function | Parallel |
| Type of motor | Stepper motor |
| Referencing | Turning: Encoder index Gripping: Fixed-stop block |
| Rotor position sensor | Incremental encoder |
| Rotor position encoder interface | RS422 TTL AB channels + zero index |
| Rotor position sensor, encoder measuring principle | Optical |
| Max. drive output speed | 240 rpm |
| Max. speed | 70 mm/s |
| Max. homing speed | 5 mm/s |
| Max. gripping speed per gripper jaw | 70 mm/s |
| Duty cycle | 100% |
| Insulation protection class | B |
| Max. current consumption | 60 mA |
| Max. current consumption, rotation | 60 mA |
| Nominal operating voltage DC | 24 V |
| Nominal operating voltage DC, rotation | 5 V |
| Note on motor nominal current | 0.5 A for gripper drive |
| Nominal voltage DC | 24 V |
| Phase winding inductance | 4 mH |
| Winding inductance phase, rotation | 11 mH |
| Phase winding resistance | 5.6 Ohm |
| Winding resistance phase, rotation | 5.8 Ohm |
| Pulses per revolution | 500 |
| Pulses per revolution, rotation | 500 |
| Nominal current per phase | 0.5 A |
| Nominal current per phase, rotation | 0.9 A |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Storage temperature | -20 °C...70 °C |
| Relative air humidity | 0 - 85% Non-condensing |
| Degree of protection | IP20 |
| Ambient temperature | 0 °C...40 °C |
| Gripping force per gripper jaw | 3 N...14 N |
| Residual gripping force in the event of a power failure | 4 N |
| Gripping force at nominal current | 14 N |
| Motor holding torque | 0.043 Nm |
| Holding torque motor, rotation | 0.3 Nm |
| Mass moment of inertia | 9E-07 kgm² |
| Mass moment of inertia, rotation | 2.34E-05 kgm² |
| Max. output torque | 0.3 Nm |
| Max. force on gripper jaw Fz static | 30 N |
| Max. torque at gripper Mx static | 1.5 Nm |
| Max. torque at gripper My static | 1.5 Nm |
| Max. torque at gripper Mz static | 1.5 Nm |
| Max. nominal load | 250 g |
| Feed constant | 4.4 mm/U |
| Product weight | 724 g |
| Electrical connection 1, function | 2x encoder 2x motor |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Connection pattern F1 |
| Electrical connection 1, number of connections/cores | 31 |
| Type of mounting | Via dovetail slot |
| Note on materials | RoHS compliant |
| Material cover | Reinforced PA |
| Material housing | Anodised wrought aluminium alloy |