Part Number 8071579
VPCB-6-L-8-G38-10-F-D3-T22-M
Cụm van Festo VPCB-6-L-8-G38-10-F-D3-T22-M (Mã 8071579)
Valve unit · Van khí nén
Gọi kỹ thuật 0964.032.890 Tải datasheet PDF
Liên hệ báo giá: dongluc.industry@gmail.com
Thông số kỹ thuật
| Valve function | 3-way proportional pressure regulator |
|---|---|
| Design | Piston gate valve With integrated pressure sensors |
| Type of piloting | Direct |
| Type of actuation | Electrical |
| Type of reset | Magnetic spring |
| Flow direction | Non-reversible |
| Mounting position | Any |
| Sealing principle | Hard |
| Nominal size | 6 mm |
| Short circuit current rating | Yes |
| Display type | LED |
| Standard nominal ow rate (standardised to DIN 1343) | 725 l/min |
| Operating pressure | 0.4 MPa...0.8 MPa 4 bar...8 bar |
| Typical lowering speed | 15 mm/s |
| Information on lowering speed | When the manual exhaust is actuated with cylinder diameter 80 mm, transmission ratio 1:1 and 100 kg load. |
| Ambient temperature | 0 °C...50 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible Maximum particle size 5 µm |
| Degree of protection | IP65 |
| Note on degree of protection | In mounted state |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Note on materials | RoHS compliant |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| Instructions on use | The product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas. |
| Nominal operating voltage DC | 24 V |
| Operational voltage range DC | 21.6 V...26.4 V |
| Residual ripple | 5% |
| Max. current consumption | 1.2 A |
| Current consumption | 120 mA |
| Reverse polarity protection | For operating voltage |
| Duty cycle | 100% |
| Max. electrical power consumption | 33.5 W |
| Diagnostic function | Display via LED |
| Max. cable length | 30 M |
| Field bus, connection type | Plug |
| Field bus, connection system | M12x1, A-coded according to EN 61076-2-101 |
| Field bus, connection pattern | 5 |
| Field bus, protocol | CAN bus with Festo protocol |
| Electrical connection for drive, connection type | Socket |
| Electrical connection for drive, connection technology | M12x1, A-coded to EN 61076-2-101 |
| Electrical connection for drive, number of pins/wires | 8 |
| Electrical connection for valve, connection type | Plug |
| Electrical connection for valve, connection technology | Plug pattern type C to industry standard, 9.4 mm |
| Electrical connection for valve, number of pins/wires | 2 |
| Type of mounting | Direct mounting via M5 thread |
| Pneumatic connection, port 1 | G3/8 |
| Pneumatic connection, port 2 | G3/8 |
| Pneumatic connection, port 3 | G3/8 |
| Pneumatic connection for control component | G1/8 |
| Product weight | 1550 g |
| Material housing | Anodised wrought aluminium alloy |
| Material seals | Fluoro rubber HNBR NBR |