Part Number 552887
DAPS-0120-090-RS1-F0507-CR
Đầu truyền động xoay 90 độ Festo DAPS-0120-090-RS1-F0507-CR (Mã 552887)
Quarter turn actuator · Xy lanh
Gọi kỹ thuật 0964.032.890 Tải datasheet PDF
Liên hệ báo giá: dongluc.industry@gmail.com
Thông số kỹ thuật
| Size of valve actuator | 0120 |
|---|---|
| Flange hole pattern | F05 F07 |
| Swivel angle | 90 deg |
| Shaft connection depth | 19.3 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | No cushioning |
| Mounting position | Any |
| Mode of operation | Single-acting |
| Design | Scotch yoke system |
| Position detection | None |
| Closing direction | Closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | up to SIL 2 high demand mode up to SIL 2 Low Demand mode |
| Supply pressure for spring strength | 0.28 MPa 2.8 bar |
| Operating pressure | 0.28 MPa...0.84 MPa 2.8 bar...8.4 bar |
| Nominal operating pressure | 0.56 MPa 5.6 bar |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
| Certicate issuing authority | German Technical Control Board North (TÜV Nord) 212170801 |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -20 °C...80 °C |
| Spring return torque at 0° swivel angle | 40 Nm |
| Spring return torque at 50° swivel angle | 30 Nm |
| Spring return torque at 90° swivel angle | 60 Nm |
| Spring strength | 1 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 4.9 l |
| Product weight | 7600 g |
| Shaft connection | T17 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | High-alloy stainless steel |
| Material number cover | 1,4408 |
| Material seals | Fluoro rubber NBR PUR |
| Material housing | High-alloy stainless steel |
| Material number housing | 1,4408 |
| Material screws | High-alloy stainless steel |
| Material shaft | High-alloy stainless steel |
| Material number shaft | 1,4301 |