Part Number 552881
DAPS-0030-090-RS3-F0305-CR
Đầu truyền động xoay 90 độ Festo DAPS-0030-090-RS3-F0305-CR (Mã 552881)
Quarter turn actuator · Xy lanh
Gọi kỹ thuật 0964.032.890 Tải datasheet PDF
Liên hệ báo giá: dongluc.industry@gmail.com
Thông số kỹ thuật
| Size of valve actuator | 0030 |
|---|---|
| Flange hole pattern | F03 F05 |
| Swivel angle | 90 deg |
| Shaft connection depth | 12.1 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | No cushioning |
| Mounting position | Any |
| Mode of operation | Single-acting |
| Design | Scotch yoke system |
| Position detection | None |
| Closing direction | Closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | up to SIL 2 high demand mode up to SIL 2 Low Demand mode |
| Supply pressure for spring strength | 0.42 MPa 4.2 bar |
| Operating pressure | 0.42 MPa...0.84 MPa 4.2 bar...8.4 bar |
| Nominal operating pressure | 0.56 MPa 5.6 bar |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
| Certicate issuing authority | German Technical Control Board North (TÜV Nord) 212170801 |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -20 °C...80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 35 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 18.8 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 27.5 Nm |
| Spring return torque at 0° swivel angle | 15 Nm |
| Spring return torque at 50° swivel angle | 11.3 Nm |
| Spring return torque at 90° swivel angle | 22.5 Nm |
| Spring strength | 3 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 1.12 l |
| Product weight | 2400 g |
| Shaft connection | T11 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | High-alloy stainless steel |
| Material number cover | 1,4408 |
| Material seals | Fluoro rubber NBR PUR |
| Material housing | High-alloy stainless steel |
| Material number housing | 1,4408 |
| Material screws | High-alloy stainless steel |
| Material shaft | High-alloy stainless steel |
| Material number shaft | 1,4301 |