Part Number 551364
SME-10M
Cảm biến tiệm cận Festo SME-10M (Mã 551364)
Proximity sensor · Cảm biến
Gọi kỹ thuật 0964.032.890 Tải datasheet PDF
Liên hệ báo giá: dongluc.industry@gmail.com
Thông số kỹ thuật
| Design | For C-slot |
|---|---|
| Conforms to standard | EN 60947-5-2 |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| Special characteristics | Oil-resistant |
| Note on materials | RoHS compliant Free of halogen |
| Instructions on use | https://www.festo.com/Drive-Sensor-Overview |
| Measured variable | Position |
| Measuring principle | Magnetic reed |
| Ambient temperature | -40 °C...70 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | Contacting, bipolar |
| Switching element function | N/O contact |
| Switch-on time | 1.2 ms |
| Switch-off time | 1 ms |
| Max. switching frequency | 50 Hz |
| Max. output current | 100 mA...300 mA |
| Max. output current using mounting kits | 50 mA |
| Max. switching capacity AC | 3 VA...9 VA |
| Max. switching capacity DC | 3 W...9 W |
| Max. switching capacity DC using mounting kits | 1.5 W |
| Max. switching capacity AC using mounting kits | 1.5 VA |
| Voltage drop | 4.5 V |
| Short circuit current rating | No |
| Overload protection | No |
| Rated operational voltage DC | 24 V |
| Operational voltage range AC | 5 V...30 V |
| Operational voltage range DC | 5 V...30 V |
| Reverse polarity protection | Bipolar No |
| Electrical connection 1, connection type | Cable Cable with plug |
| Electrical connection 1, connector system | M12x1, A-coded to EN 61076-2-101 M8x1, A-coded, to EN 61076-2-104 Open end |
| Electrical connection 1, number of connections/cores | 2 3 |
| Electrical connection 1, type of mounting | Snap-locking Screw-type lock Rotatable Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock Compatible with rotatable screw-type lock Compatible with rotatable/non-rotatable screw-type lock |
| Connection outlet orientation | In-line |
| Material screw-type lock | Brass, nickel-plated |
| Test conditions cable | Bending strength: to Festo standard Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 0.2 m...10 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Material cable sheath | TPE-U(PUR) |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.4 Nm |
| Mounting position | Any |
| Material housing | Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Ambient temperature with moving cable | -20 °C...70 °C |
| Degree of protection | IP65 IP68 |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |